Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Connecting ABS to copper waste pipe
[ 3 Answers ]
I have to tie in a 3" ABS line to a vertical copper 3" stack. How do I make the connection? Regular sanitary tee is much too large. Is there a special tee that allows making a secure connection?
Connecting 3" copper pipe with 3" plastic pipe
[ 2 Answers ]
My father needs to replace an existing 3" copper bathroom drain with new 3" plastic... How does connect the existing 3" copper with the new plastic?
Connecting 2" copper pipe to 2" PVC
[ 9 Answers ]
I want to add a PVC standpipe for the washing machine and have the 2" PVC trap drain into an existing 2" copper DWV pipe. Would like to tap into the copper DWV pipe by cutting out a segment and putting in a PVC sanitary tee. I was hoping to use a shielded coupling to connect the top and bottom...
Connecting steel to copper pipe
[ 2 Answers ]
Broken steel 1/2 inch supply line. Need to replace section that is in a wall cavity.Can the steel pipe be cut and some sort of union or compression fitting be used to connect it to new copper piping without having to thread the existing steel pipe in wall?I do not see a way in wich you could thread...
A/C not cooling, Small Copper pipe COLD and Large Copper pipe room temp.
[ 4 Answers ]
I just moved into a newly constructed townhome and the a/c units are of course new. The A/c is not cooling at all. The machine inside turns on as well as the one outside. The inside A/C makes a strange sucking sound kind of like if you were sipping something out of a cup with a straw and you ran... View more questions Search
|