Not your question?
Ask your question
View similar questions
Check out some similar questions!
Midwest gfci disconnect how to wire
[ 1 Answers ]
How to wire a midwest 60 amp gfci disconnect to a hottub
Is it OK to place GFCI on the main and not the sub panel for a spa
[ 2 Answers ]
Over the weekend I helped a friend install his spa. The spa had 5 connections and 1 ground. 2 30A, 2 20A, and a neutral. We installed a 50A GFCI to the main electrical panel on the house. Then we ran that to a sub 100A panel with a reg. 20a and 30a breaker in it. Then ran it to the spa. The spa...
When adding a GFCI disconnect for hottub, should I replace GFCI in service panel?
[ 4 Answers ]
I have a hottub now but without a disconnect. Its simply a 6/3-50 amp wire that runs from the hottub to a 50amp GFCI inside the house main service panel. I want to install a disconnect 5-10 feet from the hottub. I bought a disconnect box that already has a GFCI inside of it. Should I have bought...
Gfci spa panel tripping
[ 4 Answers ]
I just installed a spa with 4 wires. The house is old and while the neutral & ground bus bars are separate in the spa panel, they are all on the same bar in the main panel. Do I need to install a ground rod by the spa panel to keep the gfci from tripping? (instead of running the ground back to the... View more questions Search
|