Check out some similar questions!
After 4 seconds hot water presser drops in half
[ 8 Answers ]
Replaced hot water tank 2 years ago.started losing hot water pressure 4 month ago. Gas, 60 gal-in. hot water pressure drops in half in 4 seconds after turned on. Cold water pressure fine . Any help would be great. Thanks
Outside tap pressure too high
[ 12 Answers ]
Hi everyone, I've been in my new place for two years now, and my outside tap pressure is too high. I purchased a psi gauge, but it only reads to 100 psi maximum. When I hooked it up to my outside tap it buried the needle on the gauge. I looked underneath the house and there is a prv to the line...
Low hot water presser
[ 1 Answers ]
How do I check the water presser for my dishwasher and a basement bathroom? The cold water and the shower in the basement are fine.
High pressure when tap first turned on
[ 1 Answers ]
When any of my water taps (kitchen, bathroom) are opened there is high pressure. This lessens immediately. I also have started having drips from shower heads which stop if another nearby water source(toilet, sink) is open. After initial burst of high pressure water pressure is normal. Any...
Very low hot water presser
[ 3 Answers ]
On hot water side the pressure is very low. Hot water is hot, but not presser behind it. The boiler has been drained and I don't seen to see any filter to clean. The psi on the boiler gauge is 20psi and the expansion tank at 18psi. Any ideas? Thank you View more questions Search
Add your answer here.
|