Help with monitor 2400

philborn Posts: 1, Reputation: 1

New Member

Jan 6, 2011, 07:10 AM

Help with monitor 2400

I have a model 2400 monitor heater and the burner light is staying on 95% of the time and it seems to be burning more fuel.The light stays on even after it reaches the set temp.
Any ideas on what could be wrong?

Check out some similar questions!

Monitor 2400 heater/error 13 [ 4 Answers ]

I have a 4 year oldmonitor 2400 which has been totally reliable until recently. I have been through the error 14 stage with dirty filters at the tank and at the heater as well as running out of fuel. This problem is error 13 where the unit fires up for approx 2 minutes then shuts down, I removed...

Repair Manual for 2400 Monitor Heater [ 1 Answers ]

No error code. When unit reaches set temp, cuts off & temp set & room lights flash. When room cools to set temp or below, unit refires OK and heats up to set temp but temp set & temp room continue to flash all the while. For this reason, I cannot program the unit. I have rebuilt older Monitor units...

Monitor heater 2400 shows e15 what is this [ 2 Answers ]

Help what does error 1 mean on a monitor heater 2400 series [ 0 Answers ]

E13 code monitor 2400 why? [ 1 Answers ]

Hello, I need some help please.. I recently bought a 2400 series monitor heater second hand. I replaced my older 441 model so I used the same exhaust and intake and lift pump. After I installed the new unit I ran it for some time and it ran fine. Ran it two more times no problem. Then one day it...

View more questions Search

Check out some similar questions!

Add your answer here.