Ask Experts Questions for FREE Help !
Ask
    kwashington's Avatar
    kwashington Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Dec 24, 2010, 11:11 AM
    Stat problem or furnace problem?
    Need help. Not sure if having problem with stat or furnace. Stat was programmed to 68, and on "Auto", but furnace kept running past 79 and non-stop. I turned off the stat but it still heated up till the circuit was shut off. I left it off for at least an hour then clicked it back on. This solved temporarily.
    cdad's Avatar
    cdad Posts: 12,700, Reputation: 1438
    Internet Research Expert
    		  
    #2

    Dec 24, 2010, 12:19 PM

    You could either have some wiring that is exposed (so check wiring all the way through for bitemarks or anything if you can) and also examine your relays in the circuit. If one sticks it will cause this to happen.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Central heating problem or water meter problem? [ 3 Answers ]

We live in an apartment building and the individual water usage is measured by private water meters (mechanical). When the apartment was built, 2 years ago, some of the meters had been fitted the wrong way (in reverse). Yesterday a plumber attended to rectify 3 meters. My 2 neighbours meters were...

My 2006 Taurus has a problem hesitating to start sometimes, what could be the problem [ 1 Answers ]

Sometimes when starting my 2006 Ford Taurus, it hesitate to start, sometimes it does this and sometimes not, what could the problem? I'm thinking the starter. I replaced the battery, thinking it could be the battery, but the problem still exist. Help!

Furnace problem [ 1 Answers ]

I have an Amada 90 gas furnace with a dual stage Aprilaire 6202/6203 control panel, and an Aprilaire thermostat. When I turn on the thermastat for heat, the furnace turns on, the fan starts, the thermocoupler glows, and the burners light. Within about 10 seconds, it all shuts down, and begins the...

Problem with furnace [ 3 Answers ]

Can anyone suggest what's the possible problem with the furnace - it makes a loud clanging noise when the heat first come on and stop right after that.

1995 Altima Idleing problem Knock & O2 sensor, EGR Flow Problem [ 1 Answers ]

I have 1995 Nissan Altima with 67,000 miles. When the car is idleing when I start it or when it is at a red light the rpm's go from 6000 to 9000. It sounds like I am reving the engine. The engine sounds fine when I am driving the car ( rpm's are consitent). I went to AutoZone the read out errors...

View more questions Search