Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Thermostat Q - Blower Does Not Turn ON in FAN Auto Mode
[ 10 Answers ]
I just installed a NOMA 7-day programmable thermostat for an electric furnace/AC system (ceiling unit). I believe the wiring (5-wire) is correct. When I set it to COOL with Fan set to AUTO, it turns on the A/C and the fan automatically. Good. But when I set it to HEAT with Fan set to AUTO,...
Furnace will not ignite in Auto mode.
[ 1 Answers ]
I have an Armstrong-Air Gas-Fired furnace G1D91AU and a programmable thermostat which when I set to heat and says system on but the furnace is not turning on. If I set the thermostat to ON the furnace runs but is blowing cold air. It this a problem with my thremostat or my furnace itself? I...
Heat won't come on in auto mode error from diagnostic panel flashing 3 times
[ 2 Answers ]
In January 2006 I had a new furnace installed ( a coleman gas furnace Model # BGAA070BDTBJ) and this ran fine throughout the rest of that winter. Early in the summer our thermostat went out and I installed a new Hunter thermostat # 42999 and I hooked it up as shown in the directions and it worked...
FAN doesn't work when it's 'Auto', but works fine at 'On' in my central air/furnace
[ 1 Answers ]
undefinedFAN 'On' or 'Auto'FAN 'On' or 'Auto' Hi, I have programmable thermostat connecting air condition / furnace system. Now if I turn system to 'Cool' and Fan at 'Auto', no cool air come out (compressor works, you can hear the noise). If I set FAN to 'On', life is getting better. But the FAN...
Programmable Thermostat Not Working in "AUTO" mode
[ 1 Answers ]
Hi, just wondering if anyone can help me here. I have a Honeywell programmable thermostat that was installed by a professional about a year ago. About 3 days ago, the thermostat stopped maintaining a temperature and began dropping. The thermostat is showing HEAT on the display, however, no heat... View more questions Search
|