 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
My gma has transferd from a analog to a hunter digital thermostat
I'm havein a issue its not working wright it will no light the pilot in my gmas pakage unit that is out doors it rund the ac just fine but won't work the heater it will not light the piolet light in it
|
||||
Check out some similar questions!
Okay, I have done some poking around, especially on this site and I've learned I bought the wrong t-stat. I had a White-Rodgers (item # 1F58-72) analog , 2-stage heat & 1 cool t-stat. I bought a Ace Hardware ATX1500 Electronic Heating & Cooling t-stat. I have seven wires (G, Y, W2, R, E =...
Hi everyone, first time poster here. I just bought a digital thermostat (Honeywell RTH230B) to replace my old Honeywell thermostat. I'm having some problems figuring out what connections to plug it into. Currently I have 4 wires screwed onto the old thermostat - White, Black, Red and Blue. The...
Here's my wires: Y, O, G, W, Blue, Black, Brown Nordyne 914832 Y - Yellow G - Green R - Red O - Orange W2 - white E - Don't recall whether the Blue was wired in or not.. (didn't think it was but now second-guessing myself)
Replacing Analog thermostat with White, Yellow, Red, & Black wiring with non-programmable digital thermostat Model #RTH3100C. Please help!!
I have an old analog thermostat which controls the heating in my condo. I want to replace it with a new digital thermostat. The present setup has four wires coming out of the electrical box. They are BROWN, BLUE, RED and BLACK. The BLACK wire is connected to the on/off switch. The RED wire is...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
