Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Toilet Flange Offset or Replace Cast Iron Main with PVC?
[ 1 Answers ]
Let me start by saying I am remodeling a small slab house in Englewood, FL. This cinder block house was built in 1950 and has a cast iron main sewer pipe under the toilet. I might add that I am not living in this house during the remodel. I am both new to remodeling and also new to this forum...
Connecting a PVC shower flange to cast iron
[ 2 Answers ]
I need to connect my pvc shower drain to the cast iron, so I get my shower pan poured. This is a repair and there is old concrete for a base. There is an inch and a half around the cast iron about 7 inches deep. There is room to get a boot on to couple them, but there is absolutely no room to...
How do I remove cemented pvc pipe from cast iron hub?
[ 7 Answers ]
Hi, I am doing a bathroom remodel and this includes moving the toilet to the opposite side of the soil stack from where it is now. I have read all about using Fernco donut etc. to install a new PVC pipe into my cast iron hub but the problem I have is that the current PCV pipe that is attached...
How do I seal pvc toilet flange to cast iron drain pipe
[ 1 Answers ]
Just bought a house with damaged toilet. Existing plumbing is pvc toilet flange inserted into cast iron drain line. The flange is loose and needs to be refastened to the floor, subfloor condition permitting . How do I seal the pvc toilet flange to cast iron drain pipe to ensure no sewer gas leak?
Cast iron toilet flange the bolt holes will not hold how do we fix it and the flange
[ 1 Answers ]
We have a cast iron flange and the bolt holes are not useable can we cut off the top and add a new plastic flange View more questions Search
|