 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Honeywell RTH2300 - heat is working but the fan won't blow in ' auto' setting.
Honeywell RTH2300 - heat is working but the fan won't blow in ' auto' setting.
The fan is working when set to "manual". I have normal R,W,G,Y connect to Carrier control board 58EJA125. Please let me know if you have any suggestion. Thanks. |
||||
Check out some similar questions!
Honeywell RTH2300 installed - heat works in 'on' setting; does not work in ' auto' setting?" JP1 heating fan control set to "HE" position (electric furnace). JP2 heat pump reverse valve set to "O" position (orange wire attached). (Installed about 6 months ago. worked fine in summer for...
When I put the thermostat on auto the heat will not come on ,however when in fan mode it blows cool air. The ac is working but in heating mode it will not come on,explain
My heat pump outside unit is out and I switched over to emergency heat on my thermostat. The heat comes on but the fan will not work in AUTO mode, I have to run the Fan in ON mode. Do you know what my problem might be? Outside unit: My outside unit had a wire that was corroded/burned in to....
I am installing a Honeywell, RTH230B. My connections are: R to Rh (red jumper to Rc that came with the unit) W to W Y to Y G to G B to nothing The fan comes on (when set to "on").
Hello, We installed the Honeywell RTH230B thermostat this January and it worked fine with our gas furnace. The problem is when we switched the control to cool yesterday the compressor turns on but the fan won't work in auto mode. It does work if I turn it to on mode only. Any ideas why the auto...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
