How to bypass Robert Shaw thermostat from early 70's era

Check out some similar questions!

I have an old Robert Shaw thermostat how do I bypass it to turn on the heater/ [ 0 Answers ]

I live in an old house that has a old floor heater, the thermostat will not turn the heat on. How can I bypass the thermostat and turn on the heater? The yellow wires are connected to the Mercury and the black ones are connected to screws.

Robert shaw thermostat eheat setting [ 1 Answers ]

We recently bought a home with a robert shaw 303 thermostat controlling our heat pump and air handler. We had a number of trades in doing some renos and I think they have adjusted the heat. I was leaving set as it was by the previous owner. My concern is that when I look at the display, I don't...

Questions about robert shaw 9620 thermostat [ 1 Answers ]

There are two temperatures being shown on the display screen of a Robertshaw 9620 thermostat. I know one of them is the room temperature (larger of the two) but what is the other temperature that is being shown?

Wiring a Robert Shaw 3210 Thermostat [ 4 Answers ]

How do I wire up this new Robertshaw 3210 Thermostat? I have a gas, forced-air furnace. The wires coming out of my wall are labeled: RC, Y, W, G. The new Robertshaw 3210 thermostat has these connectors: R, C, L, O, B, W2, E/W1, Y1, G Which wires go to which connectors? Do I need to add some...

Robert Shaw thermostat 9620 how to hook up? [ 11 Answers ]

I have a Robert Shaw 9620 7 day Programmable digital thermostat 2 heat/2 cool . We have a Goodman heat pump I want to know how to hook up this thermostat to my 7wires coming in, the 7 wires are as follows yellow blue red green white brown orange. I need to know where all these wires go to in the...

View more questions Search

Check out some similar questions!

Add your answer here.