Ask Experts Questions for FREE Help !
Ask
    yhwhufo's Avatar
    yhwhufo Posts: 1, Reputation: 1
    New Member
     
    #1

    Nov 21, 2010, 07:18 PM
    Furnace will not stay lit
    I have a heil gas furnace and it fires up and shuts down repeately without the fan coming on.
    mygirlsdad77's Avatar
    mygirlsdad77 Posts: 5,713, Reputation: 339
    Plumbing Expert
     
    #2

    Nov 21, 2010, 07:30 PM

    Clean the flame senser first and let us know how things work out.

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

My furnace won't stay lit [ 2 Answers ]

Sometimes my furnace will go through the cycle of trying to ignite 4 times without actually igniting. The 2 right burners will light up but will die out after a few seconds while the 2 left ones won't light at all. After it attempts to light up 4 times the whole system shuts down and a red light...

Furnace will not stay lit [ 1 Answers ]

I have a 17 yearold Weil McLain oil burner. I just replaced the fire box and filter. It starts when you press the reset button but goes off after a minute. How do I keep it firing?

My furnace will not stay lit [ 4 Answers ]

I have a Trane XL80 furnace. I have manually started the furnace and at the time the burners will light and continue to fire for about 5 minutes then they act like they are being blown out. The LED light at the time of start up begins to blink 4 fast blinks. The blower continues to blow cold air...

Furnace will not stay lit [ 4 Answers ]

I have a Ruud 50,000 BTU furnace and the furnace lights but the flame goes out about ten seconds after burners kick on. The yellow light never lights up during entire process. The green light is always on and does not blink. I cleaned the flame sensor with fine sandpaper and re-installed after...

GE Furnace won't stay lit [ 4 Answers ]

We've got an old (25y.o.) GE mod #BLD106F furnace, and it refuses to stay lit. The igniter will ignite the gas, then as soon as the spark goes out, the gas shuts down. Ends up sounding like woof woof woof. We replaced the Pilot Detector to no avail. To make matters more confusing, it will lite...


View more questions Search