Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Flywheel won't turn
[ 27 Answers ]
Ok, Yardman is several years old (I believe about about ten years or so) but I have had it a few months. Worked fine for awhile. Last few times I would cut it would cut for a good while then it would just cut off. Battery is weak so I would always have to jump it off beforehand. No problem with...
1 1/4 inch fittings won't fit 1 1/4 pipe
[ 1 Answers ]
The pvc nipple on the intake of my shallow well pump was leaking. I cut the 1 1/4 inch pipe and was going to couple in a new nipple. The coupling would not fit the old pipe. It is white 1 1/4 " and so is my replacement pipe. I showed it to three different hardware stores and none of them could...
My civic won't turn over
[ 1 Answers ]
OK so I think my timing is off but I don't no how to time my 89 civic so I want to know if any one could tell me how to do that or give me some where I can look to find out how to do it
89 honda civic won't turn over
[ 1 Answers ]
Most of the time it starts.Is now acting up once in a while.when you push clutch to the floor you hear a click and that is all.when you keep pushing pedal to floor it will turn over eventually.Can someone please suggest what's the problem or how to fix this? THANK YOU! View more questions Search
|