Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
BOBCAT Model 820 Snowblower Belt Part Number
[ 4 Answers ]
I have a 1964 Bobcat snow blower made by Wisconsin Marine. I need to find a replacement belt for their #98 in the parts sheet. The belt is a V-Belt about 53.5 inches by 1/2. But it is very narrow on the tappered end.
Briggs/stratton starters 16 tooth gear failure
[ 1 Answers ]
My briggs stratton 12.5 hp vangard ohv engine strips the 16 tooth starter gear. I replaced the 499521 starter. It lasted two weeks and the gear failed. Any help will be appreciated
Different ring gear sizes and different starter drive tooth count
[ 0 Answers ]
I have a 84 bronco II 2.8 v6 with starter issues. I was told that Ford offered 2 different tooth count flywheels as well as 2 different tooth count starter drives. Can't find out which goes with which. Any answers? Thank you.
Craftwman Snowblower will not engage in gear
[ 4 Answers ]
I was snowblowing today and I went to engage it to finish up and nothing happened. The auger still works but the wheels will not engage. It had been working fine and I went to pull it back and it just wouldn't go. I tried changing gears but nothing happened.
Honda hs55 snowblower, what gear lube?
[ 1 Answers ]
I have a Honda hs55 snowblower. What type of lube should I use in the housing between the 2 halves of the auger? Thanks in advance for your help View more questions Search
|