 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Mixing Plastics
During formation of a pvc plastic product, if ABS dust or particles are introduced or present in the material what will happen to the final product? Color is not an issue. How different are melting temps and will it effect the products strengh, durability etc. Will the outcome be in appearance such as splay, flash?
|
||||
Check out some similar questions!
Plastic Product design, Mold design, Plastics,
[ 2 Answers ]
What are all the precautions needs to be taken during Nylon molding?
Paint mixing
[ 2 Answers ]
What colours should I mix to get a gold colour
Mixing morter
[ 6 Answers ]
I need to know how much sand to mix with one bag of type n morter?
Sealing drain for acrylic, Swanstone, other plastics
[ 3 Answers ]
I have always used plumber's putty to seat a drain to the sink or tub. With the new "plastics" the recommendation is for one to use silicone instead because the plumber's putty is oil-based and presumably will cause degradation of the "plastic". The silicone does not seem to seal as well,...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
