 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Goodman GU125-4 Rev. S
Furnace does not kick on when dialing thermostat. Tried the following.
Jumpered term. R and W and hear a click from the unit but nothing happens. When dialing up thermostat hear same click nothing happens. Tried tripping the breaker for approx. 30sec to no avail. When I dial the nob in the furnace to pilot and push down I here a slight hiss. I believe that I have gas to the unit. Everything worked just fine up till about 2 days ago. |
||||
Check out some similar questions!
When you turn up the heat it fires up heat exchange but just when you think the blower will come on the fire goes out. Any ideas
I have a gas furnace Goodman serial GMP075-3. The fan keep running and never stop even after the termostat is set to off. Do you know what could be the problem?
My Goodman GMPN060-3 Rev A tries to start up and hums for about 4 minutes and stops. There is a solid red light. I've reset it and turned everything on and off I can see. I came home around 7 and have been tinkering w/ it. Nothing seems to get it to go. Anyone outhere that can help at this...
Have blower panel door off but do not know what to look for to determine if blower is set on medium or high. Any help appreciated. Also if set on Medium, how to change to high? Thanks
Jumped the thermostat, blower doesn't start, no flame, heard a click from the furnace when turning up tstat. Fuse on board was blown, replaced. Followed lighting instructions to no avail. Help please its getting chilly...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
