 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
I have a murray 14.5 hp 42560x92a ( I think) and the other day it stopped cranking.
I noticed a loose small red wire with a spade connector that had corroded off. I think it goes to the afterfire solenoid. Have no clue where it came from. What does it look like? I down loaded an electrical dia.but I'm not sure where it is located. It does come off the yellow and blue pigtail. The other wire is black and goes to the motor.
|
||||
Check out some similar questions!
I hope someone can ease my mind a bit, I've been waiting for my period to come this month to start taking my clomid for the first time (been trying for over 2 years):mad: I always have a few days where there not much blood at al just a bit discharge then it starts a few days later. My doctor told...
Found out end of march the building I am a tenant in is going into foreclosure, my lease is up, I have no rental agreement.. 4/20 received a three day notice, but because there is no rental agrmt I believe they should have given 15 day notice? Instructions to landlrd I read on court clerk...
My engine only gets fire when I am turning the key off, also it turms over but will not start it is a 1986 with a 460 in it help
I have a 16.5 briggs ohv put a new battery in it put another starter on it Ck all conecttions they are good.but when you go to crank it it turns slow And will even stop turning for a min.then turn slow and not crank. I have Got it to crank one time and it runs good.
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
