Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Grinding noise from Craftsman LT1000 when engaging blades
[ 6 Answers ]
Craftsman LT1000 riding mower, model 917.272761 About 5 years old, nothing but oil changes done on it Started having issues when lawn got high while I was away. When I came back and tried to mow (even at highest setting), the blade would get bound up on the grass and kept stalling the mower. ...
Blades Not Engaging- Craftsman DLT 3000
[ 1 Answers ]
My Craftsman DLT 3000 is running fine, but I am unable to get the blades to engage. When I raise the lever to get the blades to engage, it is stiff, and I get no movement from the blades. Looking at the little steel cable that the lever is connected to there's not great tension on the cable. When I...
Blades Not Engaging- Craftsman DLT 3000
[ 1 Answers ]
My Craftsman DLT 3000 is running fine, but I am unable to get the blades to engage. When I raise the lever to get the blades to engage, it is stiff, and I get no movement from the blades. Looking at the little steel cable that the lever is connected to there's not great tension on the cable. When I...
Craftsman Lawn Tractor, 2 blades don't turn
[ 1 Answers ]
I have a Craftsmand Lawn Tractor 18.5 HP, two of the blades don't turn. When manually turned all three blades turn, could it be the drive belt? Only one blade turns when engaged.
Craftsman Lawn tractor blades won't disengage
[ 1 Answers ]
The blades on my Craftsman Lawn tractor 917.270860 won't disengage. I looked at my buddies craftsman and it appears that the clutch cable is not moving the pulley to disengage the blade belt, I guess it is frozen. How do I remedy this? Pete View more questions Search
|