 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Kenmore-dishwasher-failure-codes
I have a Kenmore Elite that was bought three years ago. The unit will not complete the wash cycle. It is getting stuck in rinse mode and it never goes into the drying cycle. The dishwasher will run for hours just stuck there. ( I think that it is made by Bosch) model 630.16309406. I bought a new control panel and replaced it. This did not work. I am not sure what to look at next.
HELP! |
||||
Check out some similar questions!
I used the Diagnostics code to determine a problem on my Kennmore Dishwasher and now when I run it, the dishwasher will not advance past the wash cycle. Everything is working fine, the heating element etc are all good. I just need to know how to get it out of diagnostics mode or to reset it to...
Dishwasher was in a rinse cycle when a power failure occurred. It will not restart now. When trying to use any cycle almost every light on front panel comes on. Please help lol
I have a Kenmore special edition DW mod#66513793 full of water and there are 4 lights flashing on it. The noraml wash light was flashing when I got home so I tried to hit the start button and it started flashing too. Then I tried to hit the cancel button and that started flashing but faster as...
Our Kenmore dishwasher Model 66516032400 will not run. The "Clean" lamp which normally lights to show that a load is done is now flashing a seven flash sequence.Does anyone out there know what this is telling us?? Thank you
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
