 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
I have a 199 Mercury Sable that will not go into gear. The linkage is working fine.
I changed the transmission fluid and filter. The fluid was brownish red and no shavings or anything in the transmission pan. The linkage is fine and the fluid reads higher than full though I only added 8qts and the system calls for 13.4 qts. even after letting it warm up. It seems like the fluid is not being pulled into the system, could it be EPC or other electrical problem.
|
||||
Check out some similar questions!
What causes no spark on 2001 mercury sable
[ 4 Answers ]
It cranks
1998 mercury sable
[ 1 Answers ]
I have a brand new battery and brand new alternator. However, battery is dead after a few hours of use... using battery charger... then all is well. Why?
2000 Mercury Sable
[ 1 Answers ]
Two questions: I have a 2000 Mercury Sable fully loaded; 1) My driver side door will not open or unlock with the keyless entry or remote. I tried to manually open the door with the key and it will not unlock... what is the problem and how can I fix it? 2) The power locks in the car will...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
