 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
I have a 26 HP craftsman riding tractor. I began not wanting to engage in reverse ab
I have a 26 HP craftsman riding tractor. It began not wanting to engage in reverse about two weeks ago. Now it completely stopped going into gear at all. Could it be the drive belt or something else? The drive belt appears to be intact.
Please help. |
||||
Check out some similar questions!
Hello, I have a Craftsman tractor. I just replaced the bracket and torsion spring that hold the shifter arm on. The tractor runs great in forward but will no longer go in reverse. Any ideas. Thanks, Deb
I have a 18.5 HP Craftsman Lawn Tractor, model # 917.274811. It starts fine but the mower won't engage. The attachment clutch lever seems to have the same tension, and the drive belt seems fine. I've looked and can't see any obstructions. Any ideas?
I was cutting the grass and mowing under some trees. As I went past, a limb grabbed the shifter and pulled it all the way back. Ever since then, all of the gears are one off. What used to be reverse is now neutral, what used to be neutral is now first gear, so on and so forth. And I can't go in...
I just bought a Craftsman 24HP riding mower 2 months ago. Just today when I was mowing the lawn it died in the middle of cutting. After I disengaged the cutting blades, I was able to re-start it. But every time I rotate the engagement lever the engine dies. The belt/pulleys seem to be working...
This is the sillies thing. I had a flat back tire and took off the tire and had it fixed. I put the tire back on and then started the riding mower and it would not go into forward or reverse. I started looking through my owners manual for possible solutions and I tried to purge the transmission...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
