Ask Experts Questions for FREE Help !
Ask
    bedsaul's Avatar
    bedsaul Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Sep 5, 2010, 02:51 PM
    Troubleshooting`sears riding mower
    I have a craftsman 16hp, 42 inch cut riding mower with automatic transmission. The mower quit pulling, belts are good and have tried to purge the transmission of air with no luck...
    Mowbetter's Avatar
    Mowbetter Posts: 12, Reputation: 1
    New Member
    		  
    #2

    Sep 8, 2010, 11:17 PM

    If no noise, check the hydro lock out lever at the rear of the tractor and make sure it is positioned properly, it might be stuck at the transmission, too. If it's noisy when you try to go forward or in reverse, check the brake assy (inside of right rear wheel) and see if it is sticking. Common for brakes to stick on these mowers.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Mower deck adjustment on 42 inch Sears riding Mower [ 5 Answers ]

How do you adjust the height on my Sears 42 inch riding mower. One side cuts lower than the other.

Sears craftsman rider mower troubleshooting [ 2 Answers ]

I own a Sears Craftsman riding mower with a 42" deck. It's 17 horsepower. Every time I engage the blades, the engine cuts off. I can't seem to get the cover that is over the pulley on the left off. I've cleared dried grass from under the deck, and have applied WD 40 to the pulley wheels. The blades...

Diagram for replacing lawn mower belt on Sears Craftsman 4000 Riding Mower [ 9 Answers ]

I need a diagram on how to replace a belt on the Sears Craftsman II 4000 riding mower

Sears riding mower [ 1 Answers ]

I have a 14.5hp sears riding tractor woith a 42 inch deck When I try to disengage my blades the handle gts stuck at the bottom and I can't finish disengaging

Sears Lawn Riding Mower [ 4 Answers ]

Does anyone ever had a problem with a Sears riding mower blade disengagement?

View more questions Search