 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Goodman gmp burner
The burners are burning unevenly and then shutting off. The furnace will start, fans blow just fine, igniter glows and works and then the burners one bye one come on but the third and last one is not blowing a flame as hard or as constant as the other two.
Heating contractor wanted to replace the burners/heat exchange and other parts... again, yep not the first time. So what are we missing here? |
||||
Check out some similar questions!
Ok. I can turn the thermostat to 72 and it will stay on 64 with the fan blowing constant. Burners aren't firing. On the control board for the furnace, there is a trouble shooting light that blinks to tell you what is wrong. It blinks four times which indicates an "Open Limit Switch", and it tells...
The fan kicks on but the unit does not fire.. just blows cold air... light on board blinks 4 times
Hi There, I have a gmp 1 00-4 Gas furnace. I guess it is more than 10 years old since the house is built in 1995. The furnace was working fine last year, but this year, it stopped working. I have searched the internet and followed some of the instructions and here are the status: Call for...
Hello everyone, I have an issue with my furnace. It just recently started happening, when running the ac the unit gets to the set temperature and then the unit clicks as if where going off and clicks again and keeps running. I looked inside and didn't see the status light blink.. Any help here?
I have a Goodman GMP 100-4 running on propane The last week or so, has seen some intermittent operation. The draft inducement motor comes on but at times no ignition occurs. Vacuum manually applied to the vacuum switch results in ignition taking place. Inducement motor area has been cleaned out....
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
