Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Heating element Kenmore 70 series electric dryer
[ 6 Answers ]
When I start the dryer the heating element gets hot for about 5 seconds then blows a fuse. The dryer will still cycle, but never get hot again. I replaced the fuses and no luck. When I took the plate off I can see that it is getting hot. There are 5 coils and it appears that the top 3 coils are...
Kenmore Elite Gas Dryer not heating
[ 2 Answers ]
My 6-year-old Kenmore Elite gas dryer isn't heating. I hear the gas come on, and light, but it doesn't sound like it used to -- it seems to die off quickly, not stay strong. It sounds weak, or something. We had the dryer serviced about 2 years ago because of a faulty control panel, but the control...
Kenmore Elite HE3 Dryer Not Heating
[ 1 Answers ]
I have a Kenmore Elite Dryer (electric) that is not heating. I pulled the toe panel so I could clean it out to see if that was the problem. After I cleaned it out I ran a short cycle and still no heat. I also noticed the heating coil did not change. Should these get hot, turn red during a drying...
Kenmore Dryer not heating
[ 1 Answers ]
I'm working on my mothr in laws 10 yr old kenmore dryer that runs, but the heat element does not get hot. I have taken the element out found no breaks in it, it ohms good. I have 110 volts on both wires to the element. What am I missing ?
Kenmore dryer heating problem
[ 3 Answers ]
I’ve read through some of the post but have not actually found this questions. I have a Kenmore dryer that only heats when it is on the high heat/low heat setting. Any ideas? View more questions Search
|