Ask Experts Questions for FREE Help !
Ask
    wcatfan's Avatar
    wcatfan Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Aug 13, 2010, 02:45 PM
    How to check safety switches Murray
    Don't know how to check safety switches on Murray 17.5 rid. Mower. Batt fine. Sol. sw. fine. Starter fine. Fuse fine. Cleaned all term. Air blasted all saf. sw. plugs. Still nothing when key is turned. Will jump start. Don't really want to start trying to bypass all of them. I know where they are, just not how to check them.
    crigby's Avatar
    crigby Posts: 4,343, Reputation: 107
    Outdoor Power Equipment Expert
    		  
    #2

    Aug 16, 2010, 09:55 AM

    Hi,
    Do not know without some numbers, remember I cannot see anything from here. First I would try unplugging all the connectors as that can be a common place of failure. It has fixed more than a few for me; unplugging and plugging back.
    Peace,
    Clarke
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Craftsman LT1000 safety switches [ 4 Answers ]

What excatly do the safety switches do? I have a Craftsman LT 1000 with a 17.5 hp engine and it states in the manual that there are three switches. Do they take power off the fuel shutoff solenoid or shut the spark off to the spark plug?

Safety switches are unhooked [ 2 Answers ]

All the safety switches have been bypassed and I need the wiring diagram to locate the main safety block.

L 110 Safety Switches [ 2 Answers ]

How can I disable the safety switch in my seat?

Murray safety switches [ 2 Answers ]

Murray 12 hp 30" rider model # 30577x8a I have brand new solinoid and ignition switch, and cleaned the ign switch wiring harness. Still nothing when key is turned. Battery is fine. Must be safety switches? How do I get to each and either fix or bypass them? Pictures would be nice. Thanks.

View more questions Search