Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Ground bar and neutral bar
[ 17 Answers ]
I was working on a rehab project, and the guy working on the wiring was installing both the ground wire and the neutral wire together into the ground bar or neutral bar, depending on the side of the circuit. I was always under the impression that ground wires to ground bar and neutral wires to...
When replacing a load center do you need to add a ground bar
[ 5 Answers ]
When installing a new load center should I add a ground bar dedicated to the grounding rod. The old box had the ground tied to the neutral in the load center and the new Square D panel does not have a dedicated ground strip.
Hanging Chandelier - width of steel cross bar
[ 1 Answers ]
We are hanging a chandelier - the ceiling is not suitable therefore we will be constructing a frame which will go up both walls and across the top but not be attached to the ceiling - the top section will be 5.6m in length. The chandelier will be glass and stainless 316 and weigh a max of 100kgs. ...
Connecting Ground bar and neutral bar
[ 6 Answers ]
I'm wiring an additional panel into a garage. It's connected to the Meter through a switch that switches the power between the company power and a generator. The main house panel is inside the house. I understand that the neutral and ground are connected in the "main panel" only and any subpanel...
Ground bar vs. Neutral bar
[ 1 Answers ]
What is the difference? I understand the neutral goes on the neutral bar and the same for the ground wires but if you were to check continuity between the neutral bar and ground bar they are connected. Can you explain? View more questions Search
|