Ask Experts Questions for FREE Help !
Ask
    handyman_310's Avatar
    handyman_310 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Aug 9, 2010, 08:06 PM
    Uninstall Flush Mount Ceiling Light
    Nuvo Lighting 60/3107 "Kingston" Flush Mount Ceiling Light How do I undo this fixture to remove the dome! This is such a pain
    tkrussell's Avatar
    tkrussell Posts: 9,659, Reputation: 725
    Uber Member
    		  
    #2

    Aug 11, 2010, 07:02 AM
    The large finished nut at the bottom of the globe should unthread off a nipple, and allow the globe to drop.

    If this nut just spins, then possible the nut is on the threaded nipple too tight and the nuts up inside the fixture that hold the nipple tight to the fixture frame are loose.

    If that is the case, and cannot unthread the bottom finished nut, then you may need to break the glass.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Remove the globe from a flush mount ceiling light [ 10 Answers ]

There is a domed shaped globe with a metal ring at it's base. There is no center thumb screw and no ring screws. I have tried to turn it but it moves a fraction of an inch in both directions and no more. I have slid a putty knife between it and the ceiling but I can't pull it down. Everything I...

Flush Mount Ceiling Light. [ 3 Answers ]

I have only 2 sets of wires (not 3) coming out of the ceiling box and I am replacing a ceiling fan with a Flush Mount Ceiling Light. I identified the live wires and connected them to the light fixture wires - black to black and white to white; light doesn't work. What else is needed?

I cannot remove a flush mount ceiling lamp! [ 11 Answers ]

I am trying to remove a flush mount ceiling lamp to install a ceiling fan. I already took out the dome, the lights, and the threading tube that I thought secured the plate but I cannot remove the plate!! Is there something I'm not aware of?? Someone please help me!!

Flush mount cap [ 4 Answers ]

I'm trying to find a flush mount cap for a clay tile drain. It is an unused floor drain in my basement. I've checked all of the box stores and several places on line but to no avail. Anybody have any ideas?

Flush Mount Ceiling Fan [ 2 Answers ]

We are building a house with 9 foot ceilings in some bedrooms. Does anyone have any suggestions for flushmount ceiling fans? I would assume we would need to stay around a foot total, including lamp kit, from ceiling to botton of unit. Any suggestions are appreciated.

View more questions Search