Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Can circuit work well if we connect 12A load to 20A circuit?
[ 5 Answers ]
Hello: I have several equipment which are around 12A. I just can connect them to 20A circuit. But I am not sure if circuit will trip well under overload and short circuit. I know 15A is perfect.But,I don't have 15A circuit Thanks for everybody.
Kenmore elite front load takes a long time to go through the 2nd load
[ 0 Answers ]
My kenmore elite front load goes through the various cycles with the 1st load fine but it takes a very long time (hours) to go through the 2nd load with the same settings as the 1st.
Kenmore front load washer won't agitate/spin if load too heavy
[ 2 Answers ]
My Kenmore front loading washer, model 417.43042200, won't agitate or spin to complete the cycle if the load is too heavy, such as 5 bath towels. If I take off the back and help turn the drum in the agitate or spin mode it will agitate/spin and complete the cycle. The pump still drains the tub. If...
277/480 load after transformer = to 120/208 load feed
[ 1 Answers ]
I have a 800 amp 120/208 3P stand up section that feeds a step up 90kva transformer and the loads are nearly equal? I thought that after the transformer the load of 277/480 would be drawing less. We have about 500 amps per phase being drawn in front of the transformer and the load at the sub... View more questions Search
|