Ask Experts Questions for FREE Help !
Ask
    desmondlai's Avatar
    desmondlai Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Dec 18, 2006, 02:50 AM
    Router
    How to setup a wireless router? Say I have about 10 pcs.
    ScottGem's Avatar
    ScottGem Posts: 64,966, Reputation: 6056
    Computer Expert and Renaissance Man
    		  
    #2

    Dec 18, 2006, 06:58 AM
    This medium is best suited for asking and getting answers to specific questions, not a general tutorial.

    Have you read the manual for the router? What specific questions do you have about setup?

    Generally you connect the router to your broadband modem and power it up. You configure the router using a wired connection. Then power up the wireless PCs and they should find the router and make the connection.
    NeedKarma's Avatar
    NeedKarma Posts: 10,635, Reputation: 1706
    Uber Member
    		  
    #3

    Dec 18, 2006, 07:07 AM
    I agree with Scott. Whatever router you purchase will come with all the documentation you should need. Try it first then come back here if you have any questions.
    ScottGem's Avatar
    ScottGem Posts: 64,966, Reputation: 6056
    Computer Expert and Renaissance Man
    		  
    #4

    Mar 13, 2007, 07:09 PM
    Comments on this post
    rex2004 disagrees: well comnecting one computer and one gaming device throu this but is not working

    What are you disagreeing with? You didn't ask a question and there was nothing incorrect with my answer.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Router problem [ 3 Answers ]

I currently have three PC sharing my IP using a Linksys router. My problem is that I had all three PC's up and running for a few hours then lose their internet connection. If I run my cable from the modem directly to the PC it works, this is the second router I have tried both with the same problem...

WAP vs Router [ 14 Answers ]

So what is the difference between WAP and a router? I have a router with 4 computers wireless and 2 desktops wired. All have their own internet access (I don't access the internet through any one computer). I want to get a wireless printer server. Would I hook that up to another port on the...

Router shutdown [ 1 Answers ]

I have a Linksys router which works fine most of the time. But when I try to use multimedia (such as on line radio), I loose connectivity and have to power the router off/on to restore connection. I can go to any site, as long as I don't try to listen to music online there is no problem. Have tried...

CNC Router [ 2 Answers ]

We are using WINCNC. Is there something better? We have a Warthog CNC router, but the manufacturer's tech support isn't helping us very well. We checked the resolution and backlash compensation, but our cuts are out of the path at at the entry and withdraw points of the lines. A straight line...

2 router lan [ 2 Answers ]

I'm at a complete loss here... Net goes into a 4 port Netgear router. 3 ports are directly connected to computers, one runs down to another room. In that room is a lynksys router, that used to be a 3Com hub. The line from the netgear goes into the router, then 2 computers are attached...

View more questions Search