Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Polaris won't start
[ 1 Answers ]
4 stroke 425 4x4 magnum. It began by not starting, but try again in 20 min. or so and would start fine. The 20 min. wait time kept getting longer until now it won't start even with a little shot of ether. This progressed over a period of 4 months.
Polaris wheel not working in the pool
[ 2 Answers ]
Our 380 polaris' belt was broken. So we changed it. Now the belt is new and the wheels turn freely when we spin... but when we turn it on in the pool the wheels not turn.. any help appreciated.
Timer on my Polaris
[ 1 Answers ]
How do I connect the wiring for the motor that runs my Polaris? There are 5 ports (2 are for "line" and 2 are for "load")? Thanks.
Polaris Sweeper has little flow
[ 1 Answers ]
My Polaris is not sweeping strongly. I detached it from the wall of the pool, then turned on the pump (my Polaris pump will not run without the pool pump... so that is fine) and the pressure of water coming out seemed fine. Where is the water flow slowing down between the pool wall and the... View more questions Search
|