Ask Experts Questions for FREE Help !
Ask
    jbajcm's Avatar
    jbajcm Posts: 3, Reputation: 1
    New Member
     
    #1

    Jun 27, 2010, 03:00 PM
    Air condition 1997 ford expedition malfunction during acceleration
    Why would the AC in my 1997 ford expedition change to defrost during acceleration and then back to AC once I let off the gas
    TxGreaseMonkey's Avatar
    TxGreaseMonkey Posts: 16,761, Reputation: 5597
    Uber Member
     
    #2

    Jun 27, 2010, 03:13 PM

    Try to perform EATC on-board diagnostics:

    https://www.askmehelpdesk.com/cars-t...ml#post1999642
    jsjmax's Avatar
    jsjmax Posts: 8, Reputation: -1
    New Member
     
    #3

    Jul 12, 2010, 05:51 AM
    The controls are operated on vaccumm, When you accelerate the vaccumm(sp)drops and the blend door starts to go back to the off position. When you let up the vac comes back and puts it where the control position is set. This can be considered normal.
    CaptainRich's Avatar
    CaptainRich Posts: 4,492, Reputation: 537
    Cars & Trucks Expert
     
    #4

    Jul 12, 2010, 08:10 AM

    You shouldn't have switching back and forth if all the vacuum lines are intact and the vacuum tank is holding proper vacuum.
    That tank is designed to provide sufficient vacuum during heavy throttle applications.

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

P1131 code for a ford expedition [ 1 Answers ]

I have a 98 ford expedition and is giving me this code p1131 I all ready replace the idle control valve and still shake a little but now when I'm on the light it shuts off for no reason please help

'98 Ford Expedition door switch location? [ 4 Answers ]

None Visible, I hear spraying WD40 corrects many. Is it in the Jamb activated by the arm? Or in door panel? No Contact Points, and No Pin switches?

1999 Ford expedition XLT 4.6 engine [ 8 Answers ]

I am getting a service engine soon light whose code is saying transmission ranger sensor is faulty. I have learned that this sensor is also known as the neutral safety switch. My question is how do I replace this switch?

Ford Expedition Wipers and Odometer [ 1 Answers ]

My front and back wipers, odometer, and power locks are failing? Any ideas?

99 ford expedition door codes [ 2 Answers ]

I'm looking for the code to unlock the doos from outside please help me thanks


View more questions Search