Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
I replaced pull switch lights with recess but the wall switch won't turn off the light
[ 2 Answers ]
I added lights and outlets to my basement and all of the outlets work fine. Before I started the switch on the wall controlled one light and all of the others had pull strings. I've tried everything but the switch will not turn off the remaining three lights. What did I do wrong... how do I fix it?...
Separate Fan light switch, fan switch and switch for can lights to one location
[ 2 Answers ]
I have A circuit that has 6 can lights and a fan light. The power is at the switch box I need to know how to wire the separate switches for the cans,and the light on the fan, and fan (That would be in a three gang switch box.) to one location.
How do I wire 6 recessed lights to 1 dimmer switch with 12-3 power and 12-2 to lights
[ 1 Answers ]
How do I wire 6 recessed lights to 1 dimmer switch with 12-3 power wire source and 12-2 to between the 6 lights and then using 12-2 witing to the single pole switch?--need your help please
Converting pull switch lights to wall switch
[ 3 Answers ]
I've been struggling finding the answer to this in books and online, it seems as if it should be an easy question and something that gets done all the time. Looking for some help. My basement has several rooms and all lights are wired "hot" with pull switches from each light receptacle. When the...
3 lights ran between 2 3-ways, can one of these lights be controlled by a 3rd switch?
[ 2 Answers ]
There are 3 lights connected, 2 in one room and the third at the bottom of the stairs. There is a 3-way at the top of the stairs and another in the room with the 2 lights. This guy would like to also be able to switch off just the 3rd light at the bottom of the stairs. I did not dig into this too... View more questions Search
|