Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Removing black adhesive from floor before installing new vinyl tile
[ 6 Answers ]
I have a bathroom (at the church I belong to) that has a hard type of vinyl tile in it. A toilet has overflowed 2 times in the past and flooded the floor. As a result, a lot of the tile has come loose. I have the replacement VINYL tile, but need to know how to continue. Under the tile is black...
Subfloor?underlayment for tile floor
[ 1 Answers ]
I'm remodeling a bathroom and have replaced some rotten subflooring (1 x 12 planks). Now I want to install a tile floor. Should I affix cementboard directly to my subfloor or do I need a layer of plywood? Should I use mortar to attach the cementboard to the subfloor/plywood? Thanks!
Cantilever floor joists
[ 6 Answers ]
I wish to replace the flat picture window in our house with a bow window. I want to extend the floor by sistering the existing joists and extending them out 24 inches from the wall. There is one catch though, the existing joists are imbedded in the concrete wall of the foundation. Any ideas out...
Drilling floor joists
[ 1 Answers ]
I work for a central vac center as an installer and my boss says it is OK to drill 2 1/4 in holes in joists vertically and horizontally. He also tells me to drill in any board, laminated, tji, beams, anything. Is there codes for this?
Running Drain pipes through 2 x 8 floor joists.
[ 1 Answers ]
I am doing an addition and need to move my 3" drain pipes. My question is can Holes be cut into the floor joists (2 x 8). to accept the 3" pipes. The pipes are for the upstairs bathrooms. View more questions Search
|