 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
7.3 oil pressure sensor
My 2000 f350 7.3 will not fire off on its own. This just started one afternoon. Drove in, shut it off then no start.It turns over and nothng. I put just a small amt of spray into the filter, and I mean small, and it fires up and runs till you shut it off again. Could be all day or whenever. Idles great and runs like nothing is wrong until you shut it off and your back where you started again. Replaced the cps. Nothing showing on the dash, like eng light etc. If you shut it off and quickly restart it will go, but not if you let it sit for a say 5 min.
What is your best guess? |
||||
|
||||
|
Perform the tests in the link below: https://www.askmehelpdesk.com/cars-t...ml#post1415281 Be sure to test the glow plugs and ensure the oil is filled to the FULL Line and that it has been recently changed. If the problem persists, check the oil pressure with a known good mechanical gauge. |
||||
| Question Tools | Search this Question |
Add your answer here.
Check out some similar questions!
Unit's been on the fritz for awhile now. I had an HVAC guy out multiple times for the same problem but always a different result. They replaced the ignitor module, ignitor and control board and it still runs intermittently. Monday I grabbed the harness and gave it a tug an noticed a clicking...
On a Ford Powerstroke 7.3 Diesel High Pressure Oil Pump, what does the Oil Pressure Sensor on the oil reservoir do? It does not appear to be attached to any light or gauge that would show a drop in oil pressure. How does it work or what does it do? Thanks, Donna
Where is the evaporative pressure sensor on my 97 Mustang? Help!
1995 Ford Falcon Why does the oil pressure gauge sensor light intermittently go on and off when dropping back to stop or idle. Thanks.
View more questions Search
|
