Ask Experts Questions for FREE Help !
Ask
    lholton's Avatar
    lholton Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Jun 2, 2010, 04:21 PM
    Carrier infinity dual speed fan runs backwards
    I have a carrier infinity heat pump and the dual speed fan motor went out. It was replaced with a new one and it runs backwards. The fan was replacedd again and it still runs backwards.. What is wrong?
    KISS's Avatar
    KISS Posts: 12,510, Reputation: 839
    Uber Member
    		  
    #2

    Jun 2, 2010, 04:25 PM

    I'm not saying that this http://www.marathonelectric.com/moto...uals/SB525.pdf is your motor, but look for a "reverseing plug" and turn it around.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

My home a/c condenser fan motor runs at half speed when the system is off, why? [ 1 Answers ]

The condenser fan motor continues to run at half speed when the rest of the system is off. Run capacitor is good. Wiring is correct. Why is it doing this?

Lennox Furnace fan only runs on slow speed in heating mode [ 4 Answers ]

I hope someone out there can help me under the control logic and components on my 1994 Lennox G20RE gas furnace. My fan runs at normal speed when it runs alone. When the furnace is in the "heat" mode, the fan only runs at minimum speed. It then overheats and begins to smell like it's burning up....

After remote fan installation - fan runs backwards [ 1 Answers ]

Looked everywhere for any switch to reverse the spinning direction - nothing. No chains on fan - modern stainless steel design. Wired everything back and forth - same thing happens. Black, white red coming out the ceiling. Incoming in the receiving box - just black and white. How to wire ? Can...

3 speed ceiling fan runs on only two speeds [ 5 Answers ]

We have a 3 speed ceiling fan that runs on only two speeds. I have tried replacing the pull chain but that does not fix the problem. The fan use to have high, medium and low. We now have high, low and nothing. Any suggestions.

Air conditioner, blower fan speed with carrier furnace [ 2 Answers ]

The fan speed does not adjust when the air conditioner is on . Is this normal ? If I turn the set temp up high enough the air conditioner turns off and the adjustability returns. Auto, low, medium and high all work. When I set the temperature back down so the air conditioner turns back on the...

View more questions Search