Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Replacement of Carrier Heat Pump Thermostat with Honeywell TH6000 series thermostat.
[ 4 Answers ]
I have a Carrier Series 50QT Electric heat pump that still uses the original non programmable thermostat. I am trying to replace it with Honeywell TH6000 series programmable thermostat. The wiring on the existing Thermostat as follows: O - White, I am thinking this is the Reversing Valve? Y...
Honeywell Thermostat - Heat Pump in a Condo?
[ 21 Answers ]
I live in a 20 yr old condo with 2 Heating Systems that were described as "heat pumps" and recently decided to replace the thermostats from the 24 year old controls to Honeywell RTH7600 series touch screens. Ran into some issues as the wiring from my old thermostats didn't exactly line up with...
Honeywell rth3100c Thermostat
[ 1 Answers ]
I am trying to change from a White Rogers thermostat to a Honeywell rth3100c. The old thermostat has a blue wire on X1 and a tan wire on E. Do both of these go on the E terminal on the honeywell?
Wiring a Honeywell Thermostat to a Bryant het pump
[ 7 Answers ]
My old unit has the W1, W2, and the Y wires. It states to call a contractor. I have, and they do not know the answer. Do I use the W1 or W2 wire for the AUX, and what do I use for the B wire. My old unit does not have one. Thanks, Chris
Replacing old heat pump thermostat with Honeywell RTH3100C
[ 1 Answers ]
I have a Rheem heat pump with auxiliary and emergency heat. My current thermostat is a Seco TA-2000 with the following wiring configuration: B W2 X R G and a piece of wire connected between E and W2. There's also an orange wire that's not connected to the thermostat. The Honeywell manual does not... View more questions Search
|