Ask Experts Questions for FREE Help !
Ask
    pamlh1's Avatar
    pamlh1 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Dec 5, 2006, 04:31 PM
    Coleman heater
    My coleman heater fan comes on.The pilot light auto lights then goes right out.. The fan will stay running until manually turned off.Changed thermostat. Anyone know what it could be?
    hvac1000's Avatar
    hvac1000 Posts: 14,540, Reputation: 435
    Heating & Air Conditioning Expert
    		  
    #2

    Dec 5, 2006, 04:35 PM
    Probably the flame sensor.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Coleman gas furnace trouble [ 6 Answers ]

Coleman gas funace, model #7680C856 for mobile home worked great last year but since cold season hit, can't keep home warm (especially at night where it has been as low as 50 degrees). Thought it might be the thermostat so replaced that with new one but same thing. Thermostat clicks, burners...

Coleman Furnace [ 1 Answers ]

Burner will not stay light. Fan comes on, ign. Box activates, ign. Comes on, gas sol. Opens, Flame for 2-3 sec. ign. Box de-activates and drops gas sol. Ignitor after hot reads 40 ohms, cooling off as high as 170 ohm. Replaced: Ignitor box Gas sol. Blower PC Furnace was flooded with...

Spencer Coleman [ 5 Answers ]

Hi, Does anyone know how much an Original and Signed Piece of artwork By Spencer Coleman would be? Kind Regards Peter

Coleman Furnace Fan [ 1 Answers ]

I shut off furnace last spring by shutting off gas and pulling breaker. Turn the breaker back on and the blower runs with the thermo turned to off. I've tried to fire up furnace anyhow but it won't start. Only way to shut blower off is by turning off breaker. Was working fine the last time I had it...

View more questions Search