Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
How to replace Coil kit for dryer gas valve (2 coils, new style)
[ 4 Answers ]
RE: Whirlpool Gas Dryer How to replace Coil kit for dryer gas valve (2 coils, new style)?
Amana gas heating unit will not heat. Gas valve comes on, ignites then goes off.
[ 1 Answers ]
The gas valve comes on and I hear ignition. The flame then immediately goes out and the process repeats. I turned the unit off because as long as I leave it on the process repeats continuously.
Carrier Natural Gas Furnace main gas valve will not open every call for heat
[ 1 Answers ]
We have a Carrier Weather Maker 8000 Natural Gas Furnace not functioning properly. We have replaced pressure switch, hot surface ignitor, flame sensor and control board. It will cycle 3 to 4 times and then not come back on. Is it possibly a bad coil on gas valve?:rolleyes:
Flexi vs. Black iron gas line to water heater gas valve
[ 3 Answers ]
I have seen gas water heater " install kits" that use the yellow flex appliance line for the gas connection to the gas valve on the water heater. My tank was installed when the house was built and has black iron pipe all the way to the union and into the valve on the tank. I have heard some codes...
Gas valve noise on main valve engagement
[ 1 Answers ]
I have a carrier 58gs100ga furnace with a white rodgers 36e93 gas valve. The main gas valve solenoid chatters or rattles for a split second before it stays engaged after the pilot is proved. I just replace the spark/lock out board and the fan board for a different problem. This chatter is... View more questions Search
|