Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Convert wall opening to door
[ 6 Answers ]
I would like to convert 3 ft X 3 Ft opening on a wall to a doorway. There is a metal post coming through the sub floor to the steel "I" beam on the basement. This post is inside the wall adjacent to this opening. There is about a feet of wall above this opening; and about 4 feet of wall below...
Door Knob in center of front door
[ 6 Answers ]
Does anyone know of a resource for replacement parts for my specialty front door. The knob is located in the center of the door with a bird theme metal plate surrounding the knob - door is 35 7/8 wide - I would like to replace the knob - the hardware still works fine, I just need a compatible knob....
Outlet @ front door
[ 3 Answers ]
OK I have an outlet @ our front door and one switch is for the light on the front (closed in porch) and the one next to it we have no idea what it's for.There is outlets on the front porch but that's not for them either.We have no lamp post outfront either. Is their away I can find out what it...
Making a prehung door unit
[ 3 Answers ]
I'm fixing up a old house and a standard steel entry door unit is too high.I can special order one but I have a 9 lite wooden door slab on hand from Lowe's so thought I might try my hand at making my own prehung.Once I have it made then set in place and install like any other.My rough opening I... View more questions Search
|