Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Pilot light stays lit, but the gas valve will not open
[ 1 Answers ]
I have an old Thatcher furnace model 53170. The pilot light stays lit, but the gas valve will not open to ignite the burners. I have a constant 24v across the transformer terminals. When I check the terminals at the gas valve I experience an intermitant 24v signal about every 5 minutes. I can't...
Pilot light on gas fireplace stays lit for 5-7 days
[ 2 Answers ]
Hello Your help is greatly appreciated, here is my issue. I have a natural gas fireplace, the pilot light worked fine, the fireplace wouldn't light up unless I tapped on the gas valve. I had a heating and plumbing company come in ( 6 times and $750 later) I think they replaced every...
Goodman furnace igniter stays on 20 sec with pilot light
[ 1 Answers ]
Have a Goodman forced air unit in my garage, was used only now and then, a while ago it started this... turn furnace on and igniter comes on and lights pilot then stops for a second then comes back on for about 20-30 seconds... all this time pilot is light and strong... then igniter stops and...
Pilot light stays on but pilot switch keeps resetting
[ 5 Answers ]
I have a baso L62AA-5 pilot switch and it used to keep resetting. I would hold the switch down for a good minute and the gas lights, but after a half an hour or so it would go back to its reset position. The standing pilot light was always on and never a problem. After a few days of manually... View more questions Search
|