 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Whirlpool washer dasher not rotating
I have a Whirlpool washer, Heavy Duty Extra Large Capacity Plus - model # LXR9245EQ1. While I was washing a load of towels last night, I noticed a scubbing/grinding sound. When I checked the load, the dasher was not rotating properly. The bottom part of the dasher - the bowl-type piece of plastic at the bottom that turns - is working properly, but the upright cylinder part of the dasher freely spins. It feels like it has broken loose from the bottom part. As you can tell, I have no future career in appliance repair. If this makes any sense, and you can give me any advice, I will appreciate it greatly! Thanks!!
|
||||
|
||||
|
Sounds like the "clutch" at the top of the upper agitator isn't working.
Click on the first picture of this page: http://www.partselect.com/AdvancedMo...Num=&fkMfgID=3 .. and you'll get the general layout of the parts, then grab a wrench and have at it! :D |
||||
| Question Tools | Search this Question |
Add your answer here.
Check out some similar questions!
Washer makes banging noise when going into spin cycle, then blows the circuit
I bought a new whirpool washer, model 3SLSR6233MQ, and we installed it according to the instructions. When I use the delicate/knits cycle, it washes and when it gets to the rinse cycle, it's stuck there. It just keeps on rinsing and never fills up again, until I move the knob manually. What I want...
Greetings, I have a Whirlpool clothes washer that is 4 years old. Lately when I take the washed clothes out to place them in the dryer they are not as damp dry as they used to be. They are wetter than I would expect. What could be causing this problem? I had a repair man out and he wants to...
I just purchased a motor coupling for my washer but do not know how to install it can someone please tell me how to. Thank you.:
View more questions Search
|
