Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Adding a light kit to ceiling fan w/ light & dimmer switch
[ 6 Answers ]
I would like to add a light kit to a ceiling fan(cannot find a name on it) that is currently hooked and working up in our family room - since we moved in 6 years ago (house was built in 1991). I would like this to operate like our bedroom ceiling fan (which already has a light attached) and...
Hunter Ceiling Fan Remote Light Kit
[ 1 Answers ]
I've got a Hunter Ceiling fan with remote fan/light kit. All was working fine until I replaced a bulb. I did not, (I found later) use the recommended bulb. When I turned the light on, it came on but looked funny. Once I turned it off then back on, it would not light. I tried then replacing with a...
Installing a light kit on a ceiling fan where a switch enables both fan and light
[ 2 Answers ]
I have a Hampton Bay ceiling fan with three wires emerging from the top: white, black, red, and green. Presently the white, black, and green are hooked up to a switch and the fan works fine. The red is capped. The fan also has a chain which I intend on keeping on the medium setting indefinitely. ...
Fan light kit working but not fan - with or without remote
[ 2 Answers ]
I have a Hunter Fan (I think) that stopped working (magically) but the light kit on it works. I had recently removed an identical model fan with light kit out of another room that was working fine when I replaced it with an updated fan. So I replaced that "non-working" fan with the other one -...
Connecting Remote to Hampton Bay fan with light kit
[ 7 Answers ]
I brought a remote control for a fan that doesn't come with remote control. I have 2 wire (white and black wire) from transmitter to connect to AC power, but my room has been prewired for light and fan, therefore there is 3 wire white, red and black. I connected the black to the black and white... View more questions Search
|