Ask Experts Questions for FREE Help !
Ask
    jmudd76's Avatar
    jmudd76 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Mar 5, 2010, 12:47 PM
    Goodman limit switch diagram
    Goodman furnace flashing light code, flashes four times, I think it might have to do with a limit switch, not sure though, all diagrams and schematics unreadable.
    hvac1000's Avatar
    hvac1000 Posts: 14,540, Reputation: 435
    Heating & Air Conditioning Expert
    		  
    #2

    Mar 5, 2010, 02:10 PM
    UTL all digrams. No exact model request.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Goodman Open Limit Switch [ 10 Answers ]

I have a Goodman GDS80904BNA downflow furnace that does not work. It is 3 years old. I am getting the open limit switch error code on the circuit board when the T-stat call for heat. Only the circ. Blower turns on and rans continuously until I turn it off. Here is a little history on it. Once...

Confirm need new limit switch? (goodman gmp075-3) [ 11 Answers ]

Please help troubleshoot nat gas Goodman furnace. Power on. Fan/blower runs constantly, but no heat. No flame. 4 blinks. No manual, but I believe this to mean "open limit" by reading other posts for this model furnace. Furnace filter was very dirty and has been replaced. Traced wires back...

Open limit switch code on goodman furnace [ 1 Answers ]

I have a goodman furnace with an open limit switch code /blinking lite. Blower runs,but no flame what can I do to fix this problem?

Goodman limit switch/pressure switch? [ 2 Answers ]

Hi, I've got a goodman furnace (mod. # GHT070-3) it's about 5 years old. Recently, the heat will only kick on for about 30 seconds then shut off. It's giving me 4 flashes: Open limit switch, then it kicks off. After that it gives me 3 flashes and turns back on (pressure switch). It seems the...

View more questions Search