Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Washing Machine cold water intake
[ 3 Answers ]
I have a build up of a metallic susbtance at the cold water intake trap that goes into the washing machine. I remove the hose, clean out the substance with q-tips, replace the hose and wait for the build up to appear again. I have replaced the hoses to the washing machine, have no build up at any...
Awful cold water pressure (only to washing machine)
[ 6 Answers ]
Hi there, I'm new to this site so please excuse me if I make a mistake. Anyway, I am having a problem with cold water pressure to my washing machine. I am on a well and get good pressure everywhere except to this area. The section of the basement that the washing machine resides is slightly...
No cold water to washing machine or kitchen sink
[ 2 Answers ]
:( Hi my cold water tap in my kitchen has just stopped working. There is also no cold water going into the washing machine. I live in a block on the 3rd and top floor. All other taps are fine! Not sure what I shoud do?
Hot but no cold water to washing machine
[ 4 Answers ]
My washer will only fill up with hot water even though I have it on warm. When I try to turn on cold, water does not flow. I've taken off the hoses and run water through them thinking they were clogged but they're fine. I've turned on faucets that lead to washer and water comes out fine. I recently...
Cold water not coming out in washing machine
[ 5 Answers ]
The cold water dribbles into the washing machine when loading; I checked hose connecting machine to faucet in back. The screens were dirty; every time I do load the screens get dirty again. Is stuff coming out of the faucet? It seems to me. What does that mean? The hot water faucet is fine. My... View more questions Search
|