Ask Experts Questions for FREE Help !
Ask
Page 2 of 2 « First < 2
    steven5276's Avatar
    steven5276 Posts: 4, Reputation: 1
    New Member
    		  
    #21

    Sep 18, 2013, 03:15 PM
    Sorry I doint know what a CEL is
    TxGreaseMonkey's Avatar
    TxGreaseMonkey Posts: 16,761, Reputation: 5597
    Uber Member
    		  
    #22

    Sep 18, 2013, 04:43 PM
    CEL=Check Engine Light
    steven5276's Avatar
    steven5276 Posts: 4, Reputation: 1
    New Member
    		  
    #23

    Sep 18, 2013, 05:19 PM
    Cel never came on and still ain't on at this time
    TxGreaseMonkey's Avatar
    TxGreaseMonkey Posts: 16,761, Reputation: 5597
    Uber Member
    		  
    #24

    Sep 19, 2013, 06:22 AM
    It may have burned out. I would try replacing the bulb, since you really need it to work. How else can you check for codes? It may have burned out because a code was thrown for so long without the fault being repaired and the code cleared.

    Do a search in the site's archives on the K-Test. I wouldn't be surprised if the Engine Control Module (ECM) has failed.
    steven5276's Avatar
    steven5276 Posts: 4, Reputation: 1
    New Member
    		  
    #25

    Sep 19, 2013, 03:19 PM
    Pain in the but to replace bulb comes on thunder 1 thousand2 thousand3 then shuts off all other lights stay on bat so on obd1 k test no codes found still cranks and no start time to charge batt crank sensor? Maybe even the ingnition? New timing belt witness marks aligned another pain I getting to the point were I'm going to drop a insinery grande on it grrrrrrrrrrrrrrrr too much money vested now to stop... thronging good money at a bad product
Not your question? Ask your question View similar questions
 
Page 2 of 2 « First < 2

Question Tools Search this Question
Search this Question:

Advanced Search


Check out some similar questions!

Ignition control module for mustang 1992 [ 2 Answers ]

I would like to know where is located the computer of ford mustan 1992

Ignition control module short where? [ 3 Answers ]

I have a 1991 Ford Ranger 4 wheel drive with the 2.3L 4 cylinder engine. It has new wires, coil packs, and crank shaft position sensor. There are no burnt wires, fuses, or fusible links. There are also no chafed, pinched, or loose wires or connections in the harness yet I keep burning the Ignition...

1990 Honda Civic Ex Ignition Module Location [ 1 Answers ]

I'm trying to find mine as I think it's causeing my problems but I'm unable to locate it. Anyone know how to find it. Thanks

View more questions Search