Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
120 volts at heater element
[ 4 Answers ]
I have a Kenmore Elite Dryer, everything works fine but NO HEAT. I had an appliance repair man come out 3 times but as soon as he left, the heat never came on. He changed the heater element first, all thermostats and thermister... I went and got the wiring diagram, everything checks out OK but only...
Stratmando, thanks I don't have 120 volts between Hot and Neutral. I have 120 volts
[ 2 Answers ]
Stratmando, thanks I don't have 120 volts between Hot and Neutral. I have 120 volts between hot and ground Also have 120 volts between Neutral and ground How far in the wiring do these types of problems reach into the wall?
220 volts to 120 volts
[ 5 Answers ]
I currently have a 220 volt/30 amp service to an electric washer/dryer combination. The washer/dryer broke down and I will be switching to individual units each requiring a 120 volt/15-20 amp supply suggesting a separate circuit. The current unit had a four wire configuration (2 hot -...
120 volts vs 240 volts tools
[ 3 Answers ]
How do I configure a 120 volts 60hz woodworking tools bought in the usa to work on a 240 volts 50hz power rating in my country without having to compromise the motor operation. I understand that the stepdown transformer can only reduce the voltage but not the cycles. That means that a tool with...
Dead outlet that reads 120 volts
[ 2 Answers ]
The outlet that supplies my washer recently went dead. I replaced the outlet. Standard two-conductor grounded romex wire. Hot, common, and ground. The new outlet reads 120 volts with a voltage meter but will not power anything, not even a 20 watt lamp. Am I missing something here? Very... View more questions Search
|