 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
Check out some similar questions!
I want to ask if we can get run out in shaft D280x3500 mm araund 30 micron in cnc machine . While the shaft inside the machine we have the value with in 30 micron but when we take the shaft in CMM room we have different value around 80 micron if any one can help me??
I've had this problem since moving into my newly built home 1 1/2 yrs ago. I have a well with a water softener, but the problem just begins there. In turning on the hot water (for example to our whirlpool tub) the water would be brown, but the cold water is crystal clear. I've flushed the water...
This is in regards to an apartment in Washington state. On March 30 I gave my landlord notice of my intent to move before the end of April. At that time they informed me that a verbal notice would not be accepted and that I needed to give them a written notice before the 10th of the month. On...
This is such an odd question to ask, but this is what I was told and do not know where to go next. I had a power problem where when I turned on my computer my living room lights would flicker(computer was plugged into one of the outlets on the light circuit). Then one day they just went off, as...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
