Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Stratmando, thanks I don't have 120 volts between Hot and Neutral. I have 120 volts
[ 2 Answers ]
Stratmando, thanks I don't have 120 volts between Hot and Neutral. I have 120 volts between hot and ground Also have 120 volts between Neutral and ground How far in the wiring do these types of problems reach into the wall?
Replace a water heater 120 element with a 220 element with proper wiring
[ 4 Answers ]
Can I use a 220 heating element in a 110 water heater as long as the wiring is for 220. We had a 40 gal water heater 220 volts in a weekend cabin with one shower a complete over kill. Want to replace with a 20 gal 110 water heater but to take advantage of the 220 wiring can I just swap out the...
140 volts after new outlets were put in, 120 before?
[ 10 Answers ]
I just replaced two old outlets with two new ones. I wired them exactly as they were wired originally. When I returned the power to the circuit the voltage is 140 when originally it was 120. What did I do wrong? I tightened everything and rechecked the connections. Will I burn up appliances...
220 volts to 120 volts
[ 5 Answers ]
I currently have a 220 volt/30 amp service to an electric washer/dryer combination. The washer/dryer broke down and I will be switching to individual units each requiring a 120 volt/15-20 amp supply suggesting a separate circuit. The current unit had a four wire configuration (2 hot -...
120 volts vs 240 volts tools
[ 3 Answers ]
How do I configure a 120 volts 60hz woodworking tools bought in the usa to work on a 240 volts 50hz power rating in my country without having to compromise the motor operation. I understand that the stepdown transformer can only reduce the voltage but not the cycles. That means that a tool with... View more questions Search
|