Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Hunter fan & light control 27157 to a 3way switch
[ 1 Answers ]
From the switch I am using as a 3 way (switch) black wire top left bottom left black wire bottom right white wire . From the light box white wire nut with red wire 2 black wires. Trying to install a remote ceiling and light fan control from hunter model number 27157 with out poping the...
Hunter fan w/ light & reversing switch on remote, remote not working properly
[ 1 Answers ]
Hi, I have a Hunter fan with light and remote control, with reversible switch on the remote. RC was working fine until recently, and now, the fan will not turn off with it. I do not have a wall switch. The light works fine with RC, and the reversing also works, so does the fan speed. So, what...
Hunter Ceiling Fan Switches
[ 6 Answers ]
I replaced the pull chain switches on both my ceiling fan and light kit. When I pull the chain on the ceiling fan, it changes speeds but does not turn off. Same thing on my light kit... when I pull the chain, the light does not turn off. I have to turn them off by the light switch.
Installing Hunter Remote w/ Existing two wall switches
[ 6 Answers ]
Do I ignore the red that exists in the existing ceiling with the black, white, and ground? The red goes back to one of the switches. Does it matter which I use (black or red)? I removed an existing ceiling fan and installing another with a Hunter remote. Thanks
Hunter Fan Installation Where there are 2 wall switches
[ 5 Answers ]
I'm replacing an old ceiling fan with a Hunter fan and light. The fixture is positioned between wall switches on opposite walls and has two incoming black and white wires. The old fans I used in this room had a black wire, a white wire and a ground and all like colored wires were simply wired... View more questions Search
|