What should ohm reading be on thermister

shreffler Posts: 1, Reputation: 1

New Member

Jan 23, 2010, 04:12 PM

What should ohm reading be on thermister

What should the ohm reading be for the thermister in my kenmore dishwasher model #665-17372301?

Stratmando Posts: 11,188, Reputation: 508

Uber Member

Jan 23, 2010, 04:23 PM

It varies with Temperature:
Thermistor - Wikipedia, the free encyclopedia

Add your answer here.

Check out some similar questions!

Ohm meter reading to test thermocouple for carrier model 394jaw048080 ? [ 12 Answers ]

Great site! I have a Carrier Model # 394JAW048080 The blower does not come on and after the pilot is lit (electronically) the main gas does not come on. I previously had a tech come out and diagnose the thermocouple for temp overlimit a few years ago and I replaced the unit for $15 in 5...

Ohm value of 91 civic ingnition coil [ 1 Answers ]

I have read on several sites including this one that the coil should have a value of .3-.8 ohms or toss it. I have replacer the igniter and no spark and the coil shows 1.1 ohms. I have measured 4 different new coilds at 2 auto parts stores and they all show 1.0 ohms? I connected a standard coil...

Can I check a solenoid with a ohm meter? [ 3 Answers ]

My lawn mower click one time upon turner the key,Thinking that I had a solenoid problem I removed it from the mower. I have since found this web site and now I am not sure. I have a volt meter and I was thinking I could test the switch with it. HELP:confused:

Ok to connect 8 ohm speakers to 4 ohm stereo? [ 7 Answers ]

I have a mini stereo that comes with speakers rated at 4 ohms. I want to hook up the stereo to the in-wall speakers in the bathroom, which are rated at 8 ohms. Is this doable as-is? If not, are there any (reasonable) means of making it so? Thanks for any advice!

Wiring 2 dual 4 ohm subs to get a 2 ohm load [ 1 Answers ]

I have 2 12"alpine type are subs that are dual 4 ohm and a kenwood amp that is 500 watts at 2 ohm and 300 watts at 4 ohm. Can I hook up my subs to get a 2 ohm load and how? It's a mono amp. I can only find wiring diagrams that show a 4 ohm load and a 1 ohm load . Or should I get a amp that is 1 ohm...