 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Honeywell thermostat wiring
I have an existing old Homart thermostat for a old gas furnace. Only 2 wires enter the thermosat. I purchased a Honeywell RTH2510 programmable thermostat that seems to need more than 2 wires. Can this be used on my system and how to hook it up?
|
||||
|
||||
|
Follow the directions in the thermostat box. All you need to connect is the R terminal to one wire and the W terminal to the other wire. Install batterys and follow the setup schedule.
http://customer.honeywell.com/techli.../69-2381ES.pdf http://customer.honeywell.com/techli.../69-2380ES.pdf |
||||
| Question Tools | Search this Question |
Add your answer here.
Check out some similar questions!
I have a weathertron by trANE AND I HOOKING UP A HONEYWELL PRO TH 3000 SERIES I NEED TO KNOW THE conversion of the WIRES between the two thermostat . PLEASE HELP ask if you need more imfor
Dear sir, I purchased a honeywell digital thermostat, non programmable, and replacing the honeywell mechanical. The prooblem is i used terminals g y o w2on the old the new has e aux ygolrbc,i can hook up the gyo but,where does the brown wire go.the new honeywell is for heat pump also th321od ...
h Honeywell Visionpro 8000 Wiring Instructions I now have a Carrier heat pump with electric back-up heat . I want to replace the manual stat with a Honeywell Visionpro 8000. The terminals connected on the old stat are: O/W2 R Y/Y2 G C W/W1
My son had a Honeywell Simple Comfort 3001 thermostat zapped during a thunderstorm. He purchased a Honeywell RTH230B to replace it. The 3001 had wires going to 5 terminals: RC, G, Y, W, C. The 230B has 5 terminals but two of them are bridged: RH and RC bridged, G, Y, W. Where do we connect...
View more questions Search
|
